Pipe Crossover Connector

Description

Lock a crossbar onto an upright at any height and build movable restraint points into your pipe bondage frame.

The 90 Degree Crossover is the fitting that makes pipe bondage adjustable. It clamps one pipe across another at a right angle with both pipes running straight through, so you can park a crossbar exactly where a body needs it and move it again whenever the scene changes.

Built for Adjustable Restraint Points
Set a horizontal bar across two uprights at wrist height for a standing spread. Drop it to knee level to hold ankles wide. Stack several on one post to create a ladder of tie-off points for cuffs, rope and chain. Loosen the set screws, slide, retighten, and the frame reshapes around your play.

PRO TIP: Tighten each set screw firmly before anyone puts weight on a bar, then check in with your partner often. Device bondage takes longer to exit, so keep a hex key within arm's reach.

Features

Pipes pass through uninterrupted, no cutting or joining required

Hex set screws grip tight and release fast

Gloss black coated cast iron, the same hardware seen on Kink.com shoots

Made for 1 in. and 1.5 in. nominal pipe

Complete Your Pipe Bondage Frame
Brace the corners with a 3 way elbow corner fitting, branch off mid-bar with a short T connector, anchor uprights using a four-hole base flange or the sturdier two-screw railing base flange, and mount boards with the swivel socket member. Browse more metal bondage hardware.

Produit

Specifications
Material: Cast iron
Finish: Gloss black coating
Pipe Size: 1 in. nominal (1.3 in. outside diameter, 0.13 in. wall) or 1.5 in. nominal (1.9 in. outside diameter, 0.14 in. wall), Schedule 40
Weight (1 in.): 10.5 oz
Weight (1.5 in.): 18.7 oz
Dimensions (1 in.): 1.5" x 3.25" x 1.5"
Dimensions (1.5 in.): 2.25" x 4.5" x 2.25"
Includes: 1 fitting (pipe sold separately)

.product-link {
font-weight: normal;
color: #fff;
text-decoration:underline;
}